An anode is an electrode where oxidation reactions occur, involving atoms giving up electrons. The negatively charged free electrons then flow out of the negative terminal of the battery to produce an electrical current. It should be noted that conventionally, electricity is considered to flow in the opposite direction to the flow of electrons. Anions,…
What is a cathode?
A cathode is an electrode where reduction reactions occur, in which atoms gain electrons. Negatively charged free electrons flow into the positive terminal of a battery as an electrical current. Because electrons are negatively charged, electricity is conventionally considered to flow in the opposite direction to the flow of electrons. Cations, positively charged atoms which…
Understanding battery management systems
A battery-management system (BMS) is an electronic system or circuit that monitors the charging, discharging, temperature, and other factors influencing the state of a battery or battery pack. It’s used to monitor and maintain the health and capacity of a battery. Today’s BNS devices are advanced and will often provide pop-up notifications as you’ve likely…
The difference between primary and secondary battery chemistries
There are several differences between primary and secondary batteries. The most obvious is that primary batteries are single-use devices while secondary batteries can be recharged and used many times, but that’s not the only difference. This FAQ starts with a general overview of the differences between primary and secondary batteries; it will then look at…
How to read battery discharge curves
Batteries are complex electrochemical and thermodynamic systems, and multiple factors impact battery performance. Of course, battery chemistry is at the top of the list. Still, factors such as charge and discharge rates, operating temperatures, storage conditions, physical construction details, and more come into play when understanding which battery best suits a specific application. To begin,…
The difference between lithium ion and lithium polymer batteries
A lithium-ion polymer (LiPo) battery (also known as Li-poly, lithium-poly, PLiON, and other names) is a rechargeable Li-ion battery with a polymer electrolyte in the liquid electrolyte used in conventional Li-ion batteries. There are a variety of LiPo chemistries available. All use a high conductivity gel polymer as the electrolyte. LiPos provide higher specific energies…
Introduction to batteries and their types
What is a Battery? A battery is an electrochemical device that can store energy in the form of chemical energy. It translates to electric energy when the battery is connected in a circuit due to the flow of electrons because of the specific placement of chemicals. It was invented by Alessandro Volta, whereas Gaston Plante…
The difference between a lithium-ion battery and a lithium-ion capacitor
A lithium-ion capacitor (LIC) is a type of supercapacitor. It’s a hybrid between a Li-ion battery and an electric double-layer supercapacitor (ELDC). The cathode is activated carbon, the same as is found in an ELDC, while the anode consists of carbon material pre-doped with lithium ions, similar to those found in Li-ion batteries. LICs are…
Energy storage by the Farad, Part 2: Supercapacitors & batteries
For operating and backup power and energy storage, engineers can choose among batteries, supercapacitors, or “best of both” hybrid supercapacitors. The previous part of this article established the context for supercapacitors and explained their structure in simplistic terms; obviously, this is a component with deep physics, chemistry, materials-science considerations, and manufacturing issues. The first widely […]
Energy storage by the Farad, Part 2: Supercapacitors & batteries
For operating and backup power and energy storage, engineers can choose among batteries, supercapacitors, or “best of both” hybrid supercapacitors. The previous part of this article established the context for supercapacitors and explained their structure in simplistic terms; obviously, this is a component with deep physics, chemistry, materials-science considerations, and manufacturing issues. The first widely […]